Pages

10 August 2009

Internal combustion engine

The invention: The most common type of engine in automobiles and many other vehicles, the internal combusion engine is characterized by the fact that it burns its liquid fuelly internally—in contrast to engines, such as the steam engine, that burn fuel in external furnaces. The people behind the invention: Sir Harry Ralph Ricardo (1885-1974), an English engineer Oliver Thornycroft (1885-1956), an engineer and works manager Sir David Randall Pye (1886-1960), an engineer and administrator Sir Robert Waley Cohen (1877-1952), a scientist and industrialist The Internal Combustion Engine: 1900-1916 By the beginning of the twentieth century, internal combustion engines were almost everywhere. City streets in Berlin, London, and New York were filled with automobile and truck traffic; gasoline- and diesel-powered boat engines were replacing sails; stationary steam engines for electrical generation were being edged out by internal combustion engines. Even aircraft use was at hand: To progress from theWright brothers’ first manned flight in 1903 to the fighting planes ofWorldWar I took only a little more than a decade. The internal combustion engines of the time, however, were primitive in design. They were heavy (10 to 15 pounds per output horsepower, as opposed to 1 to 2 pounds today), slow (typically 1,000 or fewer revolutions per minute or less, as opposed to 2,000 to 5,000 today), and extremely inefficient in extracting the energy content of their fuel. These were not major drawbacks for stationary applications, or even for road traffic that rarely went faster than 30 or 40 miles per hour, but the advent of military aircraft and tanks demanded that engines be made more efficient.Engine and Fuel Design Harry Ricardo, son of an architect and grandson (on his mother’s side) of an engineer, was a central figure in the necessary redesign of internal combustion engines. As a schoolboy, he built a coal-fired steam engine for his bicycle, and at Cambridge University he produced a single-cylinder gasoline motorcycle, incorporating many of his own ideas, which won a fuel-economy competition when it traveled almost 40 miles on a quart of gasoline. He also began development of a two-cycle engine called the “Dolphin,” which later was produced for use in fishing boats and automobiles. In fact, in 1911, Ricardo took his new bride on their honeymoon trip in a Dolphinpowered car. The impetus that led to major engine research came in 1916 when Ricardo was an engineer in his family’s firm. The British government asked for newly designed tank engines, which had to operate in the dirt and mud of battle, at a tilt of up to 35 degrees, and could not give off telltale clouds of blue oil smoke. Ricardo solved the problem with a special piston design and with air circulation around the carburetor and within the engine to keep the oil cool. Design work on the tank engines turned Ricardo into a fullfledged research engineer. In 1917, he founded his own company, and a remarkable series of discoveries quickly followed. He investigated the problem of detonation of the fuel-air mixture in the internal combustion cylinder. The mixture is supposed to be ignited by the spark plug at the top of the compression stroke, with a controlled flame front spreading at a rate about equal to the speed of the piston head as it moves downward in the power stroke. Some fuels, however, detonated (ignited spontaneously throughout the entire fuel-air mixture) as a result of the compression itself, causing loss of fuel efficiency and damage to the engine. With the cooperation of RobertWaley Cohen of Shell Petroleum, Ricardo evaluated chemical mixtures of fuels and found that paraffins (such as n-heptane, the current low-octane standard) detonated readily, but aromatics such as toluene were nearly immune to detonation. He established a “toluene number” rating to describe the tendency of various fuels to detonate; this number was replaced in the 1920’s by the “octane number” devised by Thomas Midgley at the Delco laboratories in Dayton, Ohio. The fuel work was carried out in an experimental engine designed by Ricardo that allowed direct observation of the flame front as it spread and permitted changes in compression ratio while the engine was running. Three principles emerged from the investigation: the fuel-air mixture should be admitted with as much turbulence as possible, for thorough mixing and efficient combustion; the spark plug should be centrally located to prevent distant pockets of the mixture from detonating before the flame front reaches them; and the mixture should be kept as cool as possible to prevent detonation. These principles were then applied in the first truly efficient sidevalve (“L-head”) engine—that is, an engine with the valves in a chamber at the side of the cylinder, in the engine block, rather than overhead, in the engine head. Ricardo patented this design, and after winning a patent dispute in court in 1932, he received royalties or consulting fees for it from engine manufacturers all over the world.Impact The side-valve engine was the workhorse design for automobile and marine engines until after World War II. With its valves actuated directly by a camshaft in the crankcase, it is simple, rugged, and easy to manufacture. Overhead valves with overhead camshafts are the standard in automobile engines today, but the sidevalve engine is still found in marine applications and in small engines for lawn mowers, home generator systems, and the like. In its widespread use and its decades of employment, the side-valve engine represents a scientific and technological breakthrough in the twentieth century. Ricardo and his colleagues, Oliver Thornycroft and D. R. Pye, went on to create other engine designs—notably, the sleeve-valve aircraft engine that was the basic pattern for most of the great British planes of World War II and early versions of the aircraft jet engine. For his technical advances and service to the government, Ricardo was elected a Fellow of the Royal Society in 1929, and he was knighted in 1948.

03 August 2009

Interchangeable parts

The invention: 

A key idea in the late Industrial Revolution, the
interchangeability of parts made possible mass production of
identical products.


The people behind the invention:

Henry M. Leland (1843-1932), president of Cadillac Motor Car
Company in 1908, known as a master of precision
Frederick Bennett, the British agent for Cadillac Motor Car
Company who convinced the Royal Automobile Club to run
the standardization test at Brooklands, England
Henry Ford (1863-1947), founder of Ford Motor Company who
introduced the moving assembly line into the automobile
industry in 1913

Instant photography

The invention: Popularly known by its Polaroid tradename, a camera capable of producing finished photographs immediately after its film was exposed. The people behind the invention: Edwin Herbert Land (1909-1991), an American physicist and chemist Howard G. Rogers (1915- ), a senior researcher at Polaroid and Land’s collaborator William J. McCune (1915- ), an engineer and head of the Polaroid team Ansel Adams (1902-1984), an American photographer and Land’s technical consultant The Daughter of Invention Because he was a chemist and physicist interested primarily in research relating to light and vision, and to the materials that affect them, it was inevitable that Edwin Herbert Land should be drawn into the field of photography. Land founded the Polaroid Corporation in 1929. During the summer of 1943, while Land and his wife were vacationing in Santa Fe, New Mexico, with their three-yearold daughter, Land stopped to take a picture of the child. After the picture was taken, his daughter asked to see it. When she was told she could not see the picture immediately, she asked how long it would be. Within an hour after his daughter’s question, Land had conceived a preliminary plan for designing the camera, the film, and the physical chemistry of what would become the instant camera. Such a device would, he hoped, produce a picture immediately after exposure. Within six months, Land had solved most of the essential problems of the instant photography system. He and a small group of associates at Polaroid secretly worked on the project. Howard G. Rogers was Land’s collaborator in the laboratory. Land conferred the responsibility for the engineering and mechanical phase of the project on William J. McCune, who led the team that eventually designed the original camera and the machinery that produced both the camera and Land’s new film. The first Polaroid Land camera—the Model 95—produced photographs measuring 8.25 by 10.8 centimeters; there were eight pictures to a roll. Rather than being black-and-white, the original Polaroid prints were sepia-toned (producing a warm, reddish-brown color). The reasons for the sepia coloration were chemical rather than aesthetic; as soon as Land’s researchers could devise a workable formula for sharp black-and-white prints (about ten months after the camera was introduced commercially), they replaced the sepia film. A Sophisticated Chemical Reaction Although the mechanical process involved in the first demonstration camera was relatively simple, this process was merely the means by which a highly sophisticated chemical reaction— the diffusion transfer process—was produced. In the basic diffusion transfer process, when an exposed negative image is developed, the undeveloped portion corresponds to the opposite aspect of the image, the positive. Almost all selfprocessing instant photography materials operate according to three phases—negative development, diffusion transfer, and positive development. These occur simultaneously, so that positive image formation begins instantly. With black-and-white materials, the positive was originally completed in about sixty seconds; with color materials (introduced later), the process took somewhat longer. The basic phenomenon of silver in solution diffusing from one emulsion to another was first observed in the 1850’s, but no practical use of this action was made until 1939. The photographic use of diffusion transfer for producing normal-continuous-tone images was investigated actively from the early 1940’s by Land and his associates. The instant camera using this method was demonstrated in 1947 and marketed in 1948. The fundamentals of photographic diffusion transfer are simplest in a black-and-white peel-apart film. The negative sheet is exposed in the camera in the normal way. It is then pulled out of the camera, or film pack holder, by a paper tab. Next, it passes through a set of rollers, which press it face-to-face with a sheet of receiving material included in the film pack. Simultaneously, the rollers rupture a pod of reagent chemicals that are spread evenly by the rollers between the two layers. The reagent contains a strong alkali and a silver halide solvent, both of which diffuse into the negative emulsion. There the alkali activates the developing agent, which immediately reduces the exposed halides to a negative image. At the same time, the solvent dissolves the unexposed halides. The silver in the dissolved halides forms the positive image. Impact The Polaroid Land camera had a tremendous impact on the photographic industry as well as on the amateur and professional photographer. Ansel Adams, who was known for his monumental, ultrasharp black-and-white panoramas of the American West, suggested to Land ways in which the tonal value of Polaroid film could be enhanced, as well as new applications for Polaroid photographic technology. Soon after it was introduced, Polaroid photography became part of the American way of life and changed the face of amateur photography forever. By the 1950’s, Americans had become accustomed to the world of recorded visual information through films, magazines, and newspapers; they also had become enthusiastic picturetakers as a result of the growing trend for simpler and more convenient cameras. By allowing these photographers not only to record their perceptions but also to see the results almost immediately, Polaroid brought people closer to the creative process.

Infrared photography

The invention: The first application of color to infrared photography, which performs tasks not possible for ordinary photography. The person behind the invention: Sir William Herschel (1738-1822), a pioneering English astronomer Invisible Light Photography developed rapidly in the nineteenth century when it became possible to record the colors and shades of visible light on sensitive materials. Visible light is a form of radiation that consists of electromagnetic waves, which also make up other forms of radiation such as X rays and radio waves. Visible light occupies the range of wavelengths from about 400 nanometers (1 nanometer is 1 billionth of a meter) to about 700 nanometers in the electromagnetic spectrum. Infrared radiation occupies the range fromabout 700 nanometers to about 1,350 nanometers in the electromagnetic spectrum. Infrared rays cannot be seen by the human eye, but they behave in the same way that rays of visible light behave; they can be reflected, diffracted (broken), and refracted (bent). Sir William Herschel, a British astronomer, discovered infrared rays in 1800 by calculating the temperature of the heat that they produced. The term “infrared,” which was probably first used in 1800, was used to indicate rays that had wavelengths that were longer than those on the red end (the high end) of the spectrum of visible light but shorter than those of the microwaves, which appear higher on the electromagnetic spectrum. Infrared film is therefore sensitive to the infrared radiation that the human eye cannot see or record. Dyes that were sensitive to infrared radiation were discovered early in the twentieth century, but they were not widely used until the 1930’s. Because these dyes produced only black-and-white images, their usefulness to artists and researchers was limited. After 1930, however, a tidal wave of infrared photographic applications appeared.The Development of Color-Sensitive Infrared Film In the early 1940’s, military intelligence used infrared viewers for night operations and for gathering information about the enemy. One device that was commonly used for such purposes was called a “snooper scope.” Aerial photography with black-and-white infrared film was used to locate enemy hiding places and equipment. The images that were produced, however, often lacked clear definition. The development in 1942 of the first color-sensitive infrared film, Ektachrome Aero Film, became possible when researchers at the Eastman Kodak Company’s laboratories solved some complex chemical and physical problems that had hampered the development of color infrared film up to that point. Regular color film is sensitive to all visible colors of the spectrum; infrared color film is sensitive to violet, blue, and red light as well as to infrared radiation. Typical color film has three layers of emulsion, which are sensitized to blue, green, and red. Infrared color film, however, has its three emulsion layers sensitized to green, red, and infrared. Infrared wavelengths are recorded as reds of varying densities, depending on the intensity of the infrared radiation. The more infrared radiation there is, the darker the color of the red that is recorded. In infrared photography, a filter is placed over the camera lens to block the unwanted rays of visible light. The filter blocks visible and ultraviolet rays but allows infrared radiation to pass. All three layers of infrared film are sensitive to blue, so a yellow filter is used. All blue radiation is absorbed by this filter. In regular photography, color film consists of three basic layers: the top layer is sensitive to blue light, the middle layer is sensitive to green, and the third layer is sensitive to red. Exposing the film to light causes a latent image to be formed in the silver halide crystals that make up each of the three layers. In infrared photography, color film consists of a top layer that is sensitive to infrared radiation, a middle layer sensitive to green, and a bottom layer sensitive to red. “Reversal processing” produces blue in the infrared-sensitive layer, yellow in the green-sensitive layer, and magenta in the red-sensitive layer. The blue, yellow, and magenta layers of the film produce the “false colors” that accentuate the various levels of infrared radiation shown as red in a color transparency, slide, or print.relationship to the color of light to which the layer is sensitive. If the relationship is not complementary, the resulting colors will be false. This means that objects whose colors appear to be similar to the human eye will not necessarily be recorded as similar colors on infrared film. A red rose with healthy green leaves will appear on infrared color film as being yellow with red leaves, because the chlorophyll contained in the plant leaf reflects infrared radiation and causes the green leaves to be recorded as red. Infrared radiation from about 700 nanometers to about 900 nanometers on the electromagnetic spectrum can be recorded by infrared color film. Above 900 nanometers, infrared radiation exists as heat patterns that must be recorded by nonphotographic means. Impact Infrared photography has proved to be valuable in many of the sciences and the arts. It has been used to create artistic images that are often unexpected visual explosions of everyday views. Because infrared radiation penetrates haze easily, infrared films are often used in mapping areas or determining vegetation types. Many cloud-covered tropical areas would be impossible to map without infrared photography. False-color infrared film can differentiate between healthy and unhealthy plants, so it is widely used to study insect and disease problems in plants. Medical research uses infrared photography to trace blood flow, detect and monitor tumor growth, and to study many other physiological functions that are invisible to the human eye. Some forms of cancer can be detected by infrared analysis before any other tests are able to perceive them. Infrared film is used in criminology to photograph illegal activities in the dark and to study evidence at crime scenes. Powder burns around a bullet hole, which are often invisible to the eye, show clearly on infrared film. In addition, forgeries in documents and works of art can often be seen clearly when photographed on infrared film. Archaeologists have used infrared film to locate ancient sites that are invisible in daylight. Wildlife biologists also document the behavior of animals at night with infrared equipment.

28 July 2009

In vitro plant culture

The invention: Method for propagating plants in artificial media that has revolutionized agriculture. The people behind the invention: Georges Michel Morel (1916-1973), a French physiologist Philip Cleaver White (1913- ), an American chemist Plant Tissue Grows “In Glass” In the mid-1800’s, biologists began pondering whether a cell isolated from a multicellular organism could live separately if it were provided with the proper environment. In 1902, with this question in mind, the German plant physiologist Gottlieb Haberlandt attempted to culture (grow) isolated plant cells under sterile conditions on an artificial growth medium. Although his cultured cells never underwent cell division under these “in vitro” (in glass) conditions, Haberlandt is credited with originating the concept of cell culture. Subsequently, scientists attempted to culture plant tissues and organs rather than individual cells and tried to determine the medium components necessary for the growth of plant tissue in vitro. In 1934, Philip White grew the first organ culture, using tomato roots. The discovery of plant hormones, which are compounds that regulate growth and development, was crucial to the successful culture of plant tissues; in 1939, Roger Gautheret, P. Nobécourt, and White independently reported the successful culture of plant callus tissue. “Callus” is an irregular mass of dividing cells that often results from the wounding of plant tissue. Plant scientists were fascinated by the perpetual growth of such tissue in culture and spent years establishing optimal growth conditions and exploring the nutritional and hormonal requirements of plant tissue. Plants by the Millions A lull in botanical research occurred during World War II, but immediately afterward there was a resurgence of interest in applying tissue culture techniques to plant research. Georges Morel, a plant physiologist at the National Institute for Agronomic Research in France, was one of many scientists during this time who had become interested in the formation of tumors in plants as well as in studying various pathogens such as fungi and viruses that cause plant disease. To further these studies, Morel adapted existing techniques in order to grow tissue from a wider variety of plant types in culture, and he continued to try to identify factors that affected the normal growth and development of plants. Morel was successful in culturing tissue from ferns and was the first to culture monocot plants. Monocots have certain features that distinguish them fromthe other classes of seed-bearing plants, especially with respect to seed structure. More important, the monocots include the economically important species of grasses (the major plants of range and pasture) and cereals. For these cultures, Morel utilized a small piece of the growing tip of a plant shoot (the shoot apex) as the starting tissue material. This tissue was placed in a glass tube, supplied with a medium containing specific nutrients, vitamins, and plant hormones, and allowed to grow in the light. Under these conditions, the apex tissue grew roots and buds and eventually developed into a complete plant. Morel was able to generate whole plants from pieces of the shoot apex that were only 100 to 250 micrometers in length. Morel also investigated the growth of parasites such as fungi and viruses in dual culture with host-plant tissue. Using results from these studies and culture techniques that he had mastered, Morel and his colleague Claude Martin regenerated virus-free plants from tissue that had been taken from virally infected plants. Tissues from certain tropical species, dahlias, and potato plants were used for the original experiments, but after Morel adapted the methods for the generation of virus-free orchids, plants that had previously been difficult to propagate by any means, the true significance of his work was recognized. Morel was the first to recognize the potential of the in vitro culture methods for the mass propagation of plants. He estimated that several million plants could be obtained in one year from a single small piece of shoot-apex tissue. Plants generated in this manner were clonal (genetically identical organisms prepared from a single plant).With other methods of plant propagation, there is often a great variation in the traits of the plants produced, but as a result of Morel’s ideas, breeders could select for some desirable trait in a particular plant and then produce multiple clonal plants, all of which expressed the desired trait. The methodology also allowed for the production of virus-free plant material, which minimized both the spread of potential pathogens during shipping and losses caused by disease. Consequences Variations on Morel’s methods are used to propagate plants used for human food consumption; plants that are sources of fiber, oil, and livestock feed; forest trees; and plants used in landscaping and in the floral industry. In vitro stocks are preserved under deepfreeze conditions, and disease-free plants can be proliferated quickly at any time of the year after shipping or storage. The in vitro multiplication of plants has been especially useful for species such as coconut and certain palms that cannot be propagated by other methods, such as by sowing seeds or grafting, and has also become important in the preservation and propagation of rare plant species that might otherwise have become extinct. Many of these plants are sources of pharmaceuticals, oils, fragrances, and other valuable products. The capability of regenerating plants from tissue culture has also been crucial in basic scientific research. Plant cells grown in culture can be studied more easily than can intact plants, and scientists have gained an in-depth understanding of plant physiology and biochemistry by using this method. This information and the methods of Morel and others have made possible the genetic engineering and propagation of crop plants that are resistant to disease or disastrous environmental conditions such as drought and freezing. In vitro techniques have truly revolutionized agriculture.

IBM Model 1401 Computer

The invention: A relatively small, simple, and inexpensive computer that is often credited with having launched the personal computer age. The people behind the invention: Howard H. Aiken (1900-1973), an American mathematician Charles Babbage (1792-1871), an English mathematician and inventor Herman Hollerith (1860-1929), an American inventor Computers: From the Beginning Computers evolved into their modern form over a period of thousands of years as a result of humanity’s efforts to simplify the process of counting. Two counting devices that are considered to be very simple, early computers are the abacus and the slide rule. These calculating devices are representative of digital and analog computers, respectively, because an abacus counts numbers of things, while the slide rule calculates length measurements. The first modern computer, which was planned by Charles Babbage in 1833, was never built. It was intended to perform complex calculations with a data processing/memory unit that was controlled by punched cards. In 1944, Harvard University’s Howard H. Aiken and the International Business Machines (IBM) Corporation built such a computer—the huge, punched-tape-controlled Automatic Sequence Controlled Calculator, or Mark I ASCC, which could perform complex mathematical operations in seconds. During the next fifteen years, computer advances produced digital computers that used binary arithmetic for calculation, incorporated simplified components that decreased the sizes of computers, had much faster calculating speeds, and were transistorized. Although practical computers had become much faster than they had been only a few years earlier, they were still huge and extremely expensive. In 1959, however, IBM introduced the Model 1401 computer. Smaller, simpler, and much cheaper than the multimillion-dollar computers that were available, the IBM Model 1401 computer was also relatively easy to program and use. Its low cost, simplicity of operation, and very wide use have led many experts to view the IBM Model 1401 computer as beginning the age of the personal computer. Computer Operation and IBM’s Model 1401 Modern computers are essentially very fast calculating machines that are capable of sorting, comparing, analyzing, and outputting information, as well as storing it for future use. Many sources credit Aiken’s Mark I ASCC as being the first modern computer to be built. This huge, five-ton machine used thousands of relays to perform complex mathematical calculations in seconds. Soon after its introduction, other companies produced computers that were faster and more versatile than the Mark I. The computer development race was on. All these early computers utilized the decimal system for calculations until it was found that binary arithmetic, whose numbers are combinations of the binary digits 1 and 0, was much more suitable for the purpose. The advantage of the binary system is that the electronic switches that make up a computer (tubes, transistors, or chips) can be either on or off; in the binary system, the on state can be represented by the digit 1, the off state by the digit 0. Strung together correctly, binary numbers, or digits, can be inputted rapidly and used for high-speed computations. In fact, the computer term bit is a contraction of the phrase “binary digit.” A computer consists of input and output devices, a storage device (memory), arithmetic and logic units, and a control unit. In most cases, a central processing unit (CPU) combines the logic, arithmetic, memory, and control aspects. Instructions are loaded into the memory via an input device, processed, and stored. Then, the CPU issues commands to the other parts of the system to carry out computations or other functions and output the data as needed. Most output is printed as hard copy or displayed on cathode-ray tube monitors, or screens. The early modern computers—such as the Mark I ASCC—were huge because their information circuits were large relays or tubes. Computers became smaller and smaller as the tubes were replaced first with transistors, then with simple integrated circuits, and then with silicon chips. Each technological changeover also produced more powerful, more cost-effective computers. In the 1950’s, with reliable transistors available, IBM began the development of two types of computers that were completed by about 1959. The larger version was the Stretch computer, which was advertised as the most powerful computer of its day. Customized for each individual purchaser (for example, the Atomic Energy Commission), a Stretch computer cost $10 million or more. Some innovations in Stretch computers included semiconductor circuits, new switching systems that quickly converted various kinds of data into one language that was understood by the CPU, rapid data readers, and devices that seemed to anticipate future operations. Consequences The IBM Model 1401 was the first computer sold in very large numbers. It led IBM and other companies to seek to develop less expensive, more versatile, smaller computers that would be sold to small businesses and to individuals. Six years after the development of the Model 1401, other IBM models—and those made by other companies—became available that were more compact and had larger memories. The search for compactness and versatility continued. A major development was the invention of integrated circuits by Jack S. Kilby of Texas Instruments; these integrated circuits became available by the mid-1960’s. They were followed by even smaller “microprocessors” (computer chips) that became available in the 1970’s. Computers continued to become smaller and more powerful. Input and storage devices also decreased rapidly in size. At first, the punched cards invented by Herman Hollerith, founder of the Tabulation Machine Company (which later became IBM), were read by bulky readers. In time, less bulky magnetic tapes and more compact readers were developed, after which magnetic disks and compact disc drives were introduced. Many other advances have been made. Modern computers can talk, create art and graphics, compose music, play games, and operate robots. Further advancement is expected as societal needs change. Many experts believe that it was the sale of large numbers of IBM Model 1401 computers that began the trend.

20 July 2009

Hydrogen bomb

The invention: Popularly known as the “H-Bomb,” the hydrogen bomb differs from the original atomic bomb in using fusion, rather than fission, to create a thermonuclear explosion almost a thousand times more powerful. The people behind the invention: Edward Teller (1908- ), a Hungarian-born theoretical physicist Stanislaw Ulam (1909-1984), a Polish-born mathematician Crash Development Afew months before the 1942 creation of the Manhattan Project, the United States-led effort to build the atomic (fission) bomb, physicist Enrico Fermi suggested to Edward Teller that such a bomb could release more energy by the process of heating a mass of the hydrogen isotope deuterium and igniting the fusion of hydrogen into helium. Fusion is the process whereby two atoms come together to form a larger atom, and this process usually occurs only in stars, such as the Sun. Physicists Hans Bethe, George Gamow, and Teller had been studying fusion since 1934 and knew of the tremendous energy than could be released by this process—even more energy than the fission (atom-splitting) process that would create the atomic bomb. Initially, Teller dismissed Fermi’s idea, but later in 1942, in collaboration with Emil Konopinski, he concluded that a hydrogen bomb, or superbomb, could be made. For practical considerations, it was decided that the design of the superbomb would have to wait until after the war. In 1946, a secret conference on the superbomb was held in Los Alamos, New Mexico, that was attended by, among other Manhattan Project veterans, Stanislaw Ulam and Klaus Emil Julius Fuchs. Supporting the investigation of Teller’s concept, the conferees requested a more complete mathematical analysis of his own admittedly crude calculations on the dynamics of the fusion reaction. In 1947, Teller believed that these calculations might take years. Two years later, however,the Soviet explosion of an atomic bomb convinced Teller that America’s ColdWar adversary was hard at work on its own superbomb. Even when new calculations cast further doubt on his designs, Teller began a vigorous campaign for crash development of the hydrogen bomb, or H-bomb. The Superbomb Scientists knew that fusion reactions could be induced by the explosion of an atomic bomb. The basic problem was simple and formidable: How could fusion fuel be heated and compressed long enough to achieve significant thermonuclear burning before the atomic fission explosion blew the assembly apart? A major part of the solution came from Ulam in 1951. He proposed using the energy from an exploding atomic bomb to induce significant thermonuclear reactions in adjacent fusion fuel components. This arrangement, in which the A-bomb (the primary) is physically separated from the H-bomb’s (the secondary’s) fusion fuel, became known as the “Teller-Ulam configuration.” All H-bombs are cylindrical, with an atomic device at one end and the other components filling the remaining space. Energy from the exploding primary could be transported by X rays and would therefore affect the fusion fuel at near light speed—before the arrival of the explosion. Frederick de Hoffman’s work verified and enriched the new concept. In the revised method, moderated X rays from the primary irradiate a reactive plastic medium surrounding concentric and generally cylindrical layers of fusion and fission fuel in the secondary. Instantly, the plastic becomes a hot plasma that compresses and heats the inner layer of fusion fuel, which in turn compresses a central core of fissile plutonium to supercriticality. Thus compressed, and bombarded by fusion-produced, high-energy neutrons, the fission element expands rapidly in a chain reaction from the inside out, further compressing and heating the surrounding fusion fuel, releasing more energy and more neutrons that induce fission in a fuel casing-tamper made of normally stable uranium 238. With its equipment to refrigerate the hydrogen isotopes, the device created to test Teller’s new concept weighed more than sixty tons. During Operation Ivy, it was tested at Elugelab in the Marshall Islands on November 1, 1952. Exceeding the expectations of all concerned and vaporizing the island, the explosion equaled 10.4 million tons of trinitrotoluene (TNT), which meant that it was about seven hundred times more powerful than the atomic bomb dropped on Hiroshima, Japan, in 1945. A version of this device weighing about 20 tons was prepared for delivery by specially modified Air Force B-36 bombers in the event of an emergency during wartime. In development at Los Alamos before the 1952 test was a device weighing only about 4 tons, a “dry bomb” that did not require refrigeration equipment or liquid fusion fuel; when sufficiently compressed and heated in its molded-powder form, the new fusion fuel component, lithium-6 deutride, instantly produced tritium, an isotope of hydrogen. This concept was tested during Operation Castle at Bikini atoll in 1954 and produced a yield of 15 million tons of TNT, the largest-ever nuclear explosion created by the United States. Consequences Teller was not alone in believing that the world could produce thermonuclear devices capable of causing great destruction. Months before Fermi suggested to Teller the possibility of explosive thermonuclear reactions on Earth, Japanese physicist Tokutaro Hagiwara had proposed that a uranium 235 bomb could ignite significant fusion reactions in hydrogen. The Soviet Union successfully tested an H-bomb dropped from an airplane in 1955, one year before the United States did so. Teller became the scientific adviser on nuclear affairs of many presidents, from Dwight D. Eisenhower to Ronald Reagan. The widespread blast and fallout effects of H-bombs assured the mutual destruction of the users of such weapons. During the Cold War (from about 1947 to 1981), both the United States and the Soviet Union possessed H-bombs. “Testing” these bombs made each side aware of how powerful the other side was. Everyone wanted to avoid nuclear war. It was thought that no one would try to start a war that would end in the world’s destruction. This theory was called deterrence: The United States wanted to let the Soviet Union know that it had just as many bombs, or more, than it did, so that the leaders of the Sovet Union would be deterred from starting a war.Teller knew that the availability of H-bombs on both sides was not enough to guarantee that such weapons would never be used. It was also necessary to make the Soviet Union aware of the existence of the bombs through testing. He consistently advised against U.S. participation with the Soviet Union in a moratorium (period of waiting) on nuclear weapons testing. Largely based on Teller’s urging that underground testing be continued, the United States rejected a total moratorium in favor of the 1963 Atmospheric Test Ban Treaty. During the 1980’s, Teller, among others, convinced President Reagan to embrace the Strategic Defense Initiative (SDI). Teller argued that SDI components, such as the space-based “Excalibur,” a nuclear bomb-powered X-ray laser weapon proposed by the Lawrence- Livermore National Laboratory, would make thermonuclear war not unimaginable, but theoretically impossible.

19 July 2009

Hovercraft

The invention: A vehicle requiring no surface contact for traction that moves freely over a variety of surfaces—particularly water—while supported on a self-generated cushion of air. The people behind the invention: Christopher Sydney Cockerell (1910- ), a British engineer who built the first hovercraft Ronald A. Shaw (1910- ), an early pioneer in aerodynamics who experimented with hovercraft Sir John Isaac Thornycroft (1843-1928), a Royal Navy architect who was the first to experiment with air-cushion theory Air-Cushion Travel The air-cushion vehicle was first conceived by Sir John Isaac Thornycroft of Great Britain in the 1870’s. He theorized that if a ship had a plenum chamber (a box open at the bottom) for a hull and it were pumped full of air, the ship would rise out of the water and move faster, because there would be less drag. The main problem was keeping the air from escaping from under the craft. In the early 1950’s, Christopher Sydney Cockerell was experimenting with ways to reduce both the wave-making and frictional resistance that craft had to water. In 1953, he constructed a punt with a fan that supplied air to the bottom of the craft, which could thus glide over the surface with very little friction. The air was contained under the craft by specially constructed side walls. In 1955, the first true “hovercraft,” as Cockerell called it, was constructed of balsa wood. It weighed only 127 grams and traveled over water at a speed of 13 kilometers per hour. On November 16, 1956, Cockerell successfully demonstrated his model hovercraft at the patent agent’s office in London. It was immediately placed on the “secret” list, and Saunders-Roe Ltd. was given the first contract to build hovercraft in 1957. The first experimental piloted hovercraft, the SR.N1, which had a weight of 3,400 kilograms and could carry three people at the speed of 25 knots, was completed on May 28, 1959, and publicly demonstrated on June 11, 1959. Ground Effect Phenomenon In a hovercraft, a jet airstream is directed downward through a hole in a metal disk, which forces the disk to rise. The jet of air has a reverse effect of its own that forces the disk away from the surface. Some of the air hitting the ground bounces back against the disk to add further lift. This is called the “ground effect.” The ground effect is such that the greater the under-surface area of the hovercraft, the greater the reverse thrust of the air that bounces back. This makes the hovercraft a mechanically efficient machine because it provides three functions. First, the ground effect reduces friction between the craft and the earth’s surface. Second, it acts as a spring suspension to reduce some of the vertical acceleration effects that arise from travel over an uneven surface. Third, it provides a safe and comfortable ride at high speed, whatever the operating environment. The air cushion can distribute the weight of the hovercraft over almost its entire area so that the cushion pressure is low. The basic elements of the air-cushion vehicle are a hull, a propulsion system, and a lift system. The hull, which accommodates the crew, passengers, and freight, contains both the propulsion and lift systems. The propulsion and lift systems can be driven by the same power plant or by separate power plants. Early designs used only one unit, but this proved to be a problem when adequate power was not achieved for movement and lift. Better results are achieved when two units are used, since far more power is used to lift the vehicle than to propel it. For lift, high-speed centrifugal fans are used to drive the air through jets that are located under the craft. A redesigned aircraft propeller is used for propulsion. Rudderlike fins and an air fan that can be swiveled to provide direction are placed at the rear of the craft. Several different air systems can be used, depending on whether a skirt system is used in the lift process. The plenum chamber system, the peripheral jet system, and several types of recirculating air systems have all been successfully tried without skirting. Avariety of rigid and flexible skirts have also proved to be satisfactory, depending on the use of the vehicle. Skirts are used to hold the air for lift. Skirts were once hung like curtains around hovercraft. Instead of simple curtains to contain the air, there are now complicated designs that contain the cushion, duct the air, and even provide a secondary suspension. The materials used in the skirting have also changed from a rubberized fabric to pure rubber and nylon and, finally, to neoprene, a lamination of nylon and plastic. The three basic types of hovercraft are the amphibious, nonamphibious, and semiamphibious models. The amphibious type can travel over water and land, whereas the nonamphibious type is restricted to water travel. The semiamphibious model is also restricted to water travel but may terminate travel by nosing up on a prepared ramp or beach. All hovercraft contain built-in buoyancy tanks in the side skirting as a safety measure in the event that a hovercraft must settle on the water. Most hovercraft are equipped with gas turbines and use either propellers or water-jet propulsion. Impact Hovercraft are used primarily for short passenger ferry services. Great Britain was the only nation to produce a large number of hovercraft. The British built larger and faster craft and pioneered their successful use as ferries across the English Channel, where they could reach speeds of 111 kilometers per hour (160 knots) and carry more than four hundred passengers and almost one hundred vehicles. France and the former Soviet Union have also effectively demonstrated hovercraft river travel, and the Soviets have experimented with military applications as well. The military adaptations of hovercraft have been more diversified. Beach landings have been performed effectively, and the United States used hovercraft for river patrols during the Vietnam War. Other uses also exist for hovercraft. They can be used as harbor pilot vessels and for patrolling shores in a variety of police-and customs- related duties. Hovercraft can also serve as flood-rescue craft and fire-fighting vehicles. Even a hoverfreighter is being considered. The air-cushion theory in transport systems is rapidly developing. It has spread to trains and smaller people movers in many countries. Their smooth, rapid, clean, and efficient operation makes hovercraft attractive to transportation designers around the world.

16 July 2009

Holography

The invention: A lensless system of three-dimensional photography that was one of the most important developments in twentieth century optical science. The people behind the invention: Dennis Gabor (1900-1979), a Hungarian-born inventor and physicist who was awarded the 1971 Nobel Prize in Physics Emmett Leith (1927- ), a radar researcher who, with Juris Upatnieks, produced the first laser holograms Juris Upatnieks (1936- ), a radar researcher who, with Emmett Leith, produced the first laser holograms Easter Inspiration The development of photography in the early 1900’s made possible the recording of events and information in ways unknown before the twentieth century: the photographing of star clusters, the recording of the emission spectra of heated elements, the storing of data in the form of small recorded images (for example, microfilm), and the photographing of microscopic specimens, among other things. Because of its vast importance to the scientist, the science of photography has developed steadily. An understanding of the photographic and holographic processes requires some knowledge of the wave behavior of light. Light is an electromagnetic wave that, like a water wave, has an amplitude and a phase. The amplitude corresponds to the wave height, while the phase indicates which part of the wave is passing a given point at a given time. A cork floating in a pond bobs up and down as waves pass under it. The position of the cork at any time depends on both amplitude and phase: The phase determines on which part of the wave the cork is floating at any given time, and the amplitude determines how high or low the cork can be moved. Waves from more than one source arriving at the cork combine in ways that depend on their relative phases. If the waves meet in the same phase, they add and produce a large amplitude; if they arrive out of phase, they subtract and produce a small amplitude. The total amplitude, or intensity, depends on the phases of the combining waves. Dennis Gabor, the inventor of holography, was intrigued by the way in which the photographic image of an object was stored by a photographic plate but was unable to devote any consistent research effort to the question until the 1940’s. At that time, Gabor was involved in the development of the electron microscope. On Easter morning in 1947, as Gabor was pondering the problem of how to improve the electron microscope, the solution came to him. He would attempt to take a poor electron picture and then correct it optically. The process would require coherent electron beams—that is, electron waves with a definite phase. This two-stage method was inspired by the work of Lawrence Bragg. Bragg had formed the image of a crystal lattice by diffracting the photographic X-ray diffraction pattern of the original lattice. This double diffraction process is the basis of the holographic process. Bragg’s method was limited because of his inability to record the phase information of the X-ray photograph. Therefore, he could study only those crystals for which the phase relationship of the reflected waves could be predicted. Waiting for the Laser Gabor devised a way of capturing the phase information after he realized that adding coherent background to the wave reflected from an object would make it possible to produce an interference pattern on the photographic plate. When the phases of the two waves are identical, a maximum intensity will be recorded; when they are out of phase, a minimum intensity is recorded. Therefore, what is recorded in a hologram is not an image of the object but rather the interference pattern of the two coherent waves. This pattern looks like a collection of swirls and blank spots. The hologram (or photograph) is then illuminated by the reference beam, and part of the transmitted light is a replica of the original object wave. When viewing this object wave, one sees an exact replica of the original object. The major impediment at the time in making holograms using any form of radiation was a lack of coherent sources. For example, the coherence of the mercury lamp used by Gabor and his assistant IvorWilliams was so short that they were able to make holograms of only about a centimeter in diameter. The early results were rather poor in terms of image quality and also had a double image. For this reason, there was little interest in holography, and the subject lay almost untouched for more than ten years. Interest in the field was rekindled after the laser (light amplification by stimulated emission of radiation) was developed in 1962. Emmett Leith and Juris Upatnieks, who were conducting radar research at the University of Michigan, published the first laser holographs in 1963. The laser was an intense light source with a very long coherence length. Its monochromatic nature improved the resolution of the images greatly. Also, there was no longer any restriction on the size of the object to be photographed. The availability of the laser allowed Leith and Upatnieks to propose another improvement in holographic technique. Before 1964, holograms were made of only thin transparent objects. A small region of the hologram bore a one-to-one correspondence to a region of the object. Only a small portion of the image could be viewed at one time without the aid of additional optical components. Illuminating the transparency diffusely allowed the whole image to be seen at one time. This development also made it possible to record holograms of diffusely reflected three-dimensional objects. Gabor had seen from the beginning that this should make it possible to create three-dimensional images. After the early 1960’s, the field of holography developed very quickly. Because holography is different from conventional photography, the two techniques often complement each other. Gabor saw his idea blossom into a very important technique in optical science. Impact The development of the laser and the publication of the first laser holograms in 1963 caused a blossoming of the new technique in many fields. Soon, techniques were developed that allowed holograms to be viewed with white light. It also became possible for holograms to reconstruct multicolored images. Holographic methods have been used to map terrain with radar waves and to conduct surveillance in the fields of forestry, agriculture, and meteorology.By the 1990’s, holography had become a multimillion-dollar industry, finding applications in advertising, as an art form, and in security devices on credit cards, as well as in scientific fields. An alternate form of holography, also suggested by Gabor, uses sound waves. Acoustical imaging is useful whenever the medium around the object to be viewed is opaque to light rays—for example, in medical diagnosis. Holography has affected many areas of science, technology, and culture.

13 July 2009

Heat pump


The invention:

A device that warms and cools buildings efficiently
and cheaply by moving heat from one area to another.

The people behind the invention:

T. G. N. Haldane, a British engineer
Lord Kelvin (William Thomson, 1824-1907), a British
mathematician, scientist, and engineer
Sadi Carnot (1796-1832), a French physicist and
thermodynamicist


Heart-lung machine

The invention: The first artificial device to oxygenate and circulate blood during surgery, the heart-lung machine began the era of open-heart surgery. The people behind the invention: John H. Gibbon, Jr. (1903-1974), a cardiovascular surgeon Mary Hopkinson Gibbon (1905- ), a research technician Thomas J. Watson (1874-1956), chairman of the board of IBM T. L. Stokes and J. B. Flick, researchers in Gibbon’s laboratory Bernard J. Miller (1918- ), a cardiovascular surgeon and research associate Cecelia Bavolek, the first human to undergo open-heart surgery successfully using the heart-lung machine A Young Woman’s Death In the first half of the twentieth century, cardiovascular medicine had many triumphs. Effective anesthesia, antiseptic conditions, and antibiotics made surgery safer. Blood-typing, anti-clotting agents, and blood preservatives made blood transfusion practical. Cardiac catheterization (feeding a tube into the heart), electrocardiography, and fluoroscopy (visualizing living tissues with an X-ray machine) made the nonsurgical diagnosis of cardiovascular problems possible. As of 1950, however, there was no safe way to treat damage or defects within the heart. To make such a correction, this vital organ’s function had to be interrupted. The problem was to keep the body’s tissues alive while working on the heart. While some surgeons practiced so-called blind surgery, in which they inserted a finger into the heart through a small incision without observing what they were attempting to correct, others tried to reduce the body’s need for circulation by slowly chilling the patient until the heart stopped. Still other surgeons used “cross-circulation,” in which the patient’s circulation was connected to a donor’s circulation. All these approaches carried profound risks of hemorrhage, tissue damage, and death. In February of 1931, Gibbon witnessed the death of a young woman whose lung circulation was blocked by a blood clot. Because her blood could not pass through her lungs, she slowly lost consciousness from lack of oxygen. As he monitored her pulse and breathing, Gibbon thought about ways to circumvent the obstructed lungs and straining heart and provide the oxygen required. Because surgery to remove such a blood clot was often fatal, the woman’s surgeons operated only as a last resort. Though the surgery took only six and one-half minutes, she never regained consciousness. This experience prompted Gibbon to pursue what few people then considered a practical line of research: a way to circulate and oxygenate blood outside the body. A Woman’s Life Restored Gibbon began the project in earnest in 1934, when he returned to the laboratory of Edward D. Churchill at Massachusetts General Hospital for his second surgical research fellowship. He was assisted by Mary Hopkinson Gibbon. Together, they developed, using cats, a surgical technique for removing blood froma vein, supplying the blood with oxygen, and returning it to an artery using tubes inserted into the blood vessels. Their objective was to create a device that would keep the blood moving, spread it over a very thin layer to pick up oxygen efficiently and remove carbon dioxide, and avoid both clotting and damaging blood cells. In 1939, they reported that prolonged survival after heart-lung bypass was possible in experimental animals. WorldWar II (1939-1945) interrupted the progress of this work; it was resumed by Gibbon at Jefferson Medical College in 1944. Shortly thereafter, he attracted the interest of Thomas J.Watson, chairman of the board of the International Business Machines (IBM) Corporation, who provided the services of IBM’s experimental physics laboratory and model machine shop as well as the assistance of staff engineers. IBM constructed and modified two experimental machines over the next seven years, and IBM engineers contributed significantly to the evolution of a machine that would be practical in humans. Gibbon’s first attempt to use the pump-oxygenator in a human being was in a fifteen-month-old baby. This attempt failed, not because of a malfunction or a surgical mistake but because of a misdiagnosis. The child died following surgery because the real problem had not been corrected by the surgery. On May 6, 1953, the heart-lung machine was first used successfully on Cecelia Bavolek. In the six months before surgery, Bavolek had been hospitalized three times for symptoms of heart failure when she tried to engage in normal activity. While her circulation was connected to the heart-lung machine for forty-five minutes, the surgical team headed by Gibbon was able to close an opening between her atria and establish normal heart function. Two months later, an examination of the defect revealed that it was fully closed; Bavolek resumed a normal life. The age of open-heart surgery had begun. Consequences The heart-lung bypass technique alone could not make openheart surgery truly practical. When it was possible to keep tissues alive by diverting blood around the heart and oxygenating it, other questions already under investigation became even more critical: how to prolong the survival of bloodless organs, how to measure oxygen and carbon dioxide levels in the blood, and how to prolong anesthesia during complicated surgery. Thus, following the first successful use of the heart-lung machine, surgeons continued to refine the methods of open-heart surgery. The heart-lung apparatus set the stage for the advent of “replacement parts” for many types of cardiovascular problems. Cardiac valve replacement was first successfully accomplished in 1960 by placing an artificial ball valve between the left atrium and ventricle. In 1957, doctors performed the first coronary bypass surgery, grafting sections of a leg vein into the heart’s circulation system to divert blood around clogged coronary arteries. Likewise, the first successful heart transplant (1967) and the controversial Jarvik-7 artificial heart implantation (1982) required the ability to stop the heart and keep the body’s tissues alive during time-consuming and delicate surgical procedures. Gibbon’s heart-lung machine paved the way for all these developments.

09 July 2009

Hearing aid

The invention: Miniaturized electronic amplifier worn inside the ears of hearing-impaired persons. The organization behind the invention: Bell Labs, the research and development arm of the American Telephone and Telegraph Company Trapped in Silence Until the middle of the twentieth century, people who experienced hearing loss had little hope of being able to hear sounds without the use of large, awkward, heavy appliances. For many years, the only hearing aids available were devices known as ear trumpets. The ear trumpet tried to compensate for hearing loss by increasing the number of sound waves funneled into the ear canal. A wide, bell-like mouth similar to the bell of a musical trumpet narrowed to a tube that the user placed in his or her ear. Ear trumpets helped a little, but they could not truly increase the volume of the sounds heard. Beginning in the nineteenth century, inventors tried to develop electrical devices that would serve as hearing aids. The telephone was actually a by-product of Alexander Graham Bell’s efforts to make a hearing aid. Following the invention of the telephone, electrical engineers designed hearing aids that employed telephone technology, but those hearing aids were only a slight improvement over the old ear trumpets. They required large, heavy battery packs and used a carbon microphone similar to the receiver in a telephone. More sensitive than purely physical devices such as the ear trumpet, they could transmit a wider range of sounds but could not amplify them as effectively as electronic hearing aids now do. Transistors Make Miniaturization Possible Two types of hearing aids exist: body-worn and head-worn. Body-worn hearing aids permit the widest range of sounds to be heard, but because of the devices’ larger size, many hearing impaired persons do not like to wear them. Head-worn hearing aids, especially those worn completely in the ear, are much less conspicuous. In addition to in-ear aids, the category of head-worn hearing aids includes both hearing aids mounted in eyeglass frames and those worn behind the ear. All hearing aids, whether head-worn or body-worn, consist of four parts: a microphone to pick up sounds, an amplifier, a receiver, and a power source. The microphone gathers sound waves and converts them to electrical signals; the amplifier boosts, or increases, those signals; and the receiver then converts the signals back into sound waves. In effect, the hearing aid is a miniature radio. After the receiver converts the signals back to sound waves, those waves are directed into the ear canal through an earpiece or ear mold. The ear mold generally is made of plastic and is custom fitted from an impression taken from the prospective user’s ear. Effective head-worn hearing aids could not be built until the electronic circuit was developed in the early 1950’s. The same invention— the transistor—that led to small portable radios and tape players allowed engineers to create miniaturized, inconspicuous hearing aids. Depending on the degree of amplification required, the amplifier in a hearing aid contains three or more transistors. Transistors first replaced vacuum tubes in devices such as radios and phonographs, and then engineers realized that they could be used in devices for the hearing-impaired. The research at Bell Labs that led to the invention of the transistor rose out of military research duringWorldWar II. The vacuum tubes used in, for example, radar installations to amplify the strength of electronic signals were big, were fragile because they were made of blown glass, and gave off high levels of heat when they were used. Transistors, however, made it possible to build solid-state, integrated circuits. These are made from crystals of metals such as germanium or arsenic alloys and therefore are much less fragile than glass. They are also extremely small (in fact, some integrated circuits are barely visible to the naked eye) and give off no heat during use. The number of transistors in a hearing aid varies depending upon the amount of amplification required. The first transistor is the most important for the listener in terms of the quality of sound heard. If the frequency response is set too high—that is, if the device is too sensitive—the listener will be bothered by distracting background noise. Theoretically, there is no limit on the amount of amplification that a hearing aid can be designed to provide, but there are practical limits. The higher the amplification, the more power is required to operate the hearing aid. This is why body-worn hearing aids can convey a wider range of sounds than head-worn devices can. It is the power source—not the electronic components—that is the limiting factor. A body-worn hearing aid includes a larger battery pack than can be used with a head-worn device. Indeed, despite advances in battery technology, the power requirements of a head-worn hearing aid are such that a 1.4-volt battery that could power a wristwatch for several years will last only a few days in a hearing aid. Consequences The invention of the electronic hearing aid made it possible for many hearing-impaired persons to participate in a hearing world. Prior to the invention of the hearing aid, hearing-impaired children often were unable to participate in routine school activities or function effectively in mainstream society. Instead of being able to live at home with their families and enjoy the same experiences that were available to other children their age, often they were forced to attend special schools operated by the state or by charities. Hearing-impaired people were singled out as being different and were limited in their choice of occupations. Although not every hearing-impaired person can be helped to hear with a hearing aid— particularly in cases of total hearing loss—the electronic hearing aid has ended restrictions for many hearing-impaired people. Hearingimpaired children are now included in public school classes, and hearing-impaired adults can now pursue occupations from which they were once excluded. Today, many deaf and hearing-impaired persons have chosen to live without the help of a hearing aid. They believe that they are not disabled but simply different, and they point out that their “disability” often allows them to appreciate and participate in life in unique and positive ways. For them, the use of hearing aids is a choice, not a necessity. For those who choose, hearing aids make it possible to participate in the hearing world.

Hard disk

The invention: A large-capacity, permanent magnetic storage device built into most personal computers. The people behind the invention: Alan Shugart (1930- ), an engineer who first developed the floppy disk Philip D. Estridge (1938?-1985), the director of IBM’s product development facility Thomas J. Watson, Jr. (1914-1993), the chief executive officer of IBM The Personal Oddity When the International Business Machines (IBM) Corporation introduced its first microcomputer, called simply the IBM PC (for “personal computer”), the occasion was less a dramatic invention than the confirmation of a trend begun some years before. A number of companies had introduced microcomputers before IBM; one of the best known at that time was Apple Corporation’s Apple II, for which software for business and scientific use was quickly developed. Nevertheless, the microcomputer was quite expensive and was often looked upon as an oddity, not as a useful tool. Under the leadership of Thomas J. Watson, Jr., IBM, which had previously focused on giant mainframe computers, decided to develop the PC. A design team headed by Philip D. Estridge was assembled in Boca Raton, Florida, and it quickly developed its first, pacesetting product. It is an irony of history that IBM anticipated selling only one hundred thousand or so of these machines, mostly to scientists and technically inclined hobbyists. Instead, IBM’s product sold exceedingly well, and its design parameters, as well as its operating system, became standards. The earliest microcomputers used a cassette recorder as a means of mass storage; a floppy disk drive capable of storing approximately 160 kilobytes of data was initially offered only as an option. While home hobbyists were accustomed to using a cassette recorder for storage purposes, such a system was far too slow and awkward for use in business and science. As a result, virtually every IBM PC sold was equipped with at least one 5.25-inch floppy disk drive. Memory Requirements All computers require memory of two sorts in order to carry out their tasks. One type of memory is main memory, or random access memory (RAM), which is used by the computer’s central processor to store data it is using while operating. The type of memory used for this function is built typically of silicon-based integrated circuits that have the advantage of speed (to allow the processor to fetch or store the data quickly), but the disadvantage of possibly losing or “forgetting” data when the electric current is turned off. Further, such memory generally is relatively expensive. To reduce costs, another type of memory—long-term storage memory, known also as “mass storage”—was developed. Mass storage devices include magnetic media (tape or disk drives) and optical media (such as the compact disc, read-only memory, or CDROM). While the speed with which data may be retrieved from or stored in such devices is rather slow compared to the central processor’s speed, a disk drive—the most common form of mass storage used in PCs—can store relatively large amounts of data quite inexpensively. Early floppy disk drives (so called because the magnetically treated material on which data are recorded is made of a very flexible plastic) held 160 kilobytes of data using only one side of the magnetically coated disk (about eighty pages of normal, doublespaced, typewritten information). Later developments increased storage capacities to 360 kilobytes by using both sides of the disk and later, with increasing technological ability, 1.44 megabytes (millions of bytes). In contrast, mainframe computers, which are typically connected to large and expensive tape drive storage systems, could store gigabytes (millions of megabytes) of information. While such capacities seem large, the needs of business and scientific users soon outstripped available space. Since even the mailing list of a small business or a scientist’s mathematical model of a chemical reaction easily could require greater storage potential than early PCs allowed, the need arose for a mass storage device that could accommodate very large files of data. The answer was the hard disk drive, also known as a “fixed disk drive,” reflecting the fact that the disk itself is not only rigid but also permanently installed inside the machine. In 1955, IBM had envisioned the notion of a fixed, hard magnetic disk as a means of storing computer data, and, under the direction of Alan Shugart in the 1960’s, the floppy disk was developed as well. As the engineers of IBM’s facility in Boca Raton refined the idea of the original PC to design the new IBM PC XT, it became clear that chief among the needs of users was the availability of large-capability storage devices. The decision was made to add a 10-megabyte hard disk drive to the PC. On March 8, 1983, less than two years after the introduction of its first PC, IBM introduced the PC XT. Like the original, it was an evolutionary design, not a revolutionary one. The inclusion of a hard disk drive, however, signaled that mass storage devices in personal computers had arrived. Consequences Above all else, any computer provides a means for storing, ordering, analyzing, and presenting information. If the personal computer is to become the information appliance some have suggested it will be, the ability to manipulate very large amounts of data will be of paramount concern. Hard disk technology was greeted enthusiastically in the marketplace, and the demand for hard drives has seen their numbers increase as their quality increases and their prices drop. It is easy to understand one reason for such eager acceptance: convenience. Floppy-bound computer users find themselves frequently changing (or “swapping”) their disks in order to allow programs to find the data they need. Moreover, there is a limit to how much data a single floppy disk can hold. The advantage of a hard drive is that it allows users to keep seemingly unlimited amounts of data and programs stored in their machines and readily available. Also, hard disk drives are capable of finding files and transferring their contents to the processor much more quickly than a floppy drive. A user may thus create exceedingly large files, keep them on hand at all times, and manipulate data more quickly than with a floppy. Finally, while a hard drive is a slow substitute for main memory, it allows users to enjoy the benefits of larger memories at significantly lower cost. The introduction of the PC XT with its 10-megabyte hard drive was a milestone in the development of the PC. Over the next two decades, the size of computer hard drives increased dramatically. By 2001, few personal computers were sold with hard drives with less than three gigabytes of storage capacity, and hard drives with more than thirty gigabytes were becoming the standard. Indeed, for less money than a PC XT cost in the mid-1980’s, one could buy a fully equipped computer with a hard drive holding sixty gigabytes—a storage capacity equivalent to six thousand 10-megabyte hard drives.

Gyrocompass

The invention: The first practical navigational device that enabled ships and submarines to stay on course without relying on the earth’s unreliable magnetic poles. The people behind the invention: Hermann Anschütz-Kaempfe (1872-1931), a German inventor and manufacturer Jean-Bernard-Léon Foucault (1819-1868), a French experimental physicist and inventor Elmer Ambrose Sperry (1860-1930), an American engineer and inventor From Toys to Tools A gyroscope consists of a rapidly spinning wheel mounted in a frame that enables the wheel to tilt freely in any direction. The amount of momentum allows the wheel to maintain its “attitude” even when the whole device is turned or rotated. These devices have been used to solve problems arising in such areas as sailing and navigation. For example, a gyroscope aboard a ship maintains its orientation even while the ship is rolling. Among other things, this allows the extent of the roll to be measured accurately. Moreover, the spin axis of a free gyroscope can be adjusted to point toward true north. It will (with some exceptions) stay that way despite changes in the direction of a vehicle in which it is mounted. Gyroscopic effects were employed in the design of various objects long before the theory behind them was formally known. A classic example is a child’s top, which balances, seemingly in defiance of gravity, as long as it continues to spin. Boomerangs and flying disks derive stability and accuracy from the spin imparted by the thrower. Likewise, the accuracy of rifles improved when barrels were manufactured with internal spiral grooves that caused the emerging bullet to spin. In 1852, the French inventor Jean-Bernard-Léon Foucault built the first gyroscope, a measuring device consisting of a rapidly spinning wheel mounted within concentric rings that allowed the wheel to move freely about two axes. This device, like the Foucault pendulum, was used to demonstrate the rotation of the earth around its axis, since the spinning wheel, which is not fixed, retains its orientation in space while the earth turns under it. The gyroscope had a related interesting property: As it continued to spin, the force of the earth’s rotation caused its axis to rotate gradually until it was oriented parallel to the earth’s axis, that is, in a north-south direction. It is this property that enables the gyroscope to be used as a compass. When Magnets Fail In 1904, Hermann Anschütz-Kaempfe, a German manufacturer working in the Kiel shipyards, became interested in the navigation problems of submarines used in exploration under the polar ice cap. By 1905, efficient working submarines were a reality, and it was evident to all major naval powers that submarines would play an increasingly important role in naval strategy. Submarine navigation posed problems, however, that could not be solved by instruments designed for surface vessels. Asubmarine needs to orient itself under water in three dimensions; it has no automatic horizon with respect to which it can level itself. Navigation by means of stars or landmarks is impossible when the submarine is submerged. Furthermore, in an enclosed metal hull containing machinery run by electricity, a magnetic compass is worthless. To a lesser extent, increasing use of metal, massive moving parts, and electrical equipment had also rendered the magnetic compass unreliable in conventional surface battleships. It made sense for Anschütz-Kaempfe to use the gyroscopic effect to design an instrument that would enable a ship to maintain its course while under water. Yet producing such a device would not be easy. First, it needed to be suspended in such a way that it was free to turn in any direction with as little mechanical resistance as possible. At the same time, it had to be able to resist the inevitable pitching and rolling of a vessel at sea. Finally, a continuous power supply was required to keep the gyroscopic wheels spinning at high speed. The original Anschütz-Kaempfe gyrocompass consisted of a pair of spinning wheels driven by an electric motor. The device was connected to a compass card visible to the ship’s navigator. Motor, gyroscope, and suspension system were mounted in a frame that allowed the apparatus to remain stable despite the pitch and roll of the ship. In 1906, the German navy installed a prototype of the Anschütz- Kaempfe gyrocompass on the battleship Undine and subjected it to exhaustive tests under simulated battle conditions, sailing the ship under forced draft and suddenly reversing the engines, changing the position of heavy turrets and other mechanisms, and firing heavy guns. In conditions under which a magnetic compass would have been worthless, the gyrocompass proved a satisfactory navigational tool, and the results were impressive enough to convince the German navy to undertake installation of gyrocompasses in submarines and heavy battleships, including the battleship Deutschland. Elmer Ambrose Sperry, a New York inventor intimately associated with pioneer electrical development, was independently working on a design for a gyroscopic compass at about the same time. In 1907, he patented a gyrocompass consisting of a single rotor mounted within two concentric shells, suspended by fine piano wire from a frame mounted on gimbals. The rotor of the Sperry compass operated in a vacuum, which enabled it to rotate more rapidly. The Sperry gyrocompass was in use on larger American battleships and submarines on the eve ofWorldWar I (1914-1918). Impact The ability to navigate submerged submarines was of critical strategic importance in World War I. Initially, the German navy had an advantage both in the number of submarines at its disposal and in their design and maneuverability. The German U-boat fleet declared all-out war on Allied shipping, and, although their efforts to blockade England and France were ultimately unsuccessful, the tremendous toll they inflicted helped maintain the German position and prolong the war. To a submarine fleet operating throughout the Atlantic and in the Caribbean, as well as in near-shore European waters, effective long-distance navigation was critical. Gyrocompasses were standard equipment on submarines and battleships and, increasingly, on larger commercial vessels during World War I, World War II (1939-1945), and the period between the wars. The devices also found their way into aircraft, rockets, and guided missiles. Although the compasses were made more accurate and easier to use, the fundamental design differed little from that invented by Anschütz-Kaempfe.

05 July 2009

Geothermal power

The invention: Energy generated from the earth’s natural hot springs. The people behind the invention: Prince Piero Ginori Conti (1865-1939), an Italian nobleman and industrialist Sir Charles Parsons (1854-1931), an English engineer B. C. McCabe, an American businessman Developing a Practical System The first successful use of geothermal energy was at Larderello in northern Italy. The Larderello geothermal field, located near the city of Pisa about 240 kilometers northwest of Rome, contains many hot springs and fumaroles (steam vents). In 1777, these springs were found to be rich in boron, and in 1818, Francesco de Larderel began extracting the useful mineral borax from them. Shortly after 1900, Prince Piero Ginori Conti, director of the Larderello borax works, conceived the idea of using the steam for power production. An experimental electrical power plant was constructed at Larderello in 1904 to provide electric power to the borax plant. After this initial experiment proved successful, a 250-kilowatt generating station was installed in 1913 and commercial power production began. As the Larderello field grew, additional geothermal sites throughout the region were prospected and tapped for power. Power production grew steadily until the 1940’s, when production reached 130 megawatts; however, the Larderello power plants were destroyed late inWorldWar II (1939-1945). After the war, the generating plants were rebuilt, and they were producing more than 400 megawatts by 1980. The Larderello power plants encountered many of the technical problems that were later to concern other geothermal facilities. For example, hydrogen sulfide in the steam was highly corrosive to copper, so the Larderello power plant used aluminum for electrical connections much more than did conventional power plants of the time. Also, the low pressure of the steam in early wells at Larderello presented problems. The first generators simply used steam to drive a generator and vented the spent steam into the atmosphere. Asystem of this sort, called a “noncondensing system,” is useful for small generators but not efficient to produce large amounts of power. Most steam engines derive power not only from the pressure of the steam but also from the vacuum created when the steam is condensed back to water. Geothermal systems that generate power from condensation, as well as direct steam pressure, are called “condensing systems.” Most large geothermal generators are of this type. Condensation of geothermal steam presents special problems not present in ordinary steam engines: There are other gases present that do not condense. Instead of a vacuum, condensation of steam contaminated with other gases would result in only a limited drop in pressure and, consequently, very low efficiency. Initially, the operators of Larderello tried to use the steam to heat boilers that would, in turn, generate pure steam. Eventually, a device was developed that removed most of the contaminating gases from the steam. Although later wells at Larderello and other geothermal fields produced steam at greater pressure, these engineering innovations improved the efficiency of any geothermal power plant. Expanding the Idea In 1913, the English engineer Sir Charles Parsons proposed drilling an extremely deep (12-kilometer) hole to tap the earth’s deep heat. Power from such a deep hole would not come from natural steam as at Larderello but would be generated by pumping fluid into the hole and generating steam (as hot as 500 degrees Celsius) at the bottom. In modern terms, Parsons proposed tapping “hot dryrock” geothermal energy. (No such plant has been commercially operated yet, but research is being actively pursued in several countries.) The first use of geothermal energy in the United States was for direct heating. In 1890, the municipal water company of Boise, Idaho, began supplying hot water from a geothermal well. Water was piped from the well to homes and businesses along appropriately namedWarm Springs Avenue. At its peak, the system served more than four hundred customers, but as cheap natural gas became available, the number declined. Although Larderello was the first successful geothermal electric power plant, the modern era of geothermal electric power began with the opening of the Geysers Geothermal Field in California. Early attempts began in the 1920’s, but it was not until 1955 that B. C. McCabe, a Los Angeles businessman, leased 14.6 square kilometers in the Geysers area and founded the Magma Power Company. The first 12.5-megawatt generator was installed at the Geysers in 1960, and production increased steadily from then on. The Geysers surpassed Larderello as the largest producing geothermal field in the 1970’s, and more than 1,000 megawatts were being generated by 1980. By the end of 1980, geothermal plants had been installed in thirteen countries, with a total capacity of almost 2,600 megawatts, and projects with a total capacity of more than 15,000 megawatts were being planned in more than twenty countries. Impact Geothermal power has many attractive features. Because the steam is naturally heated and under pressure, generating equipment can be simple, inexpensive, and quickly installed. Equipment and installation costs are offset by savings in fuel. It is economically practical to install small generators, a fact that makes geothermal plants attractive in remote or underdeveloped areas. Most important to a world faced with a variety of technical and environmental problems connected with fossil fuels, geothermal power does not deplete fossil fuel reserves, produces little pollution, and contributes little to the greenhouse effect. Despite its attractive features, geothermal power has some limitations. Geologic settings suitable for easy geothermal power production are rare; there must be a hot rock or magma body close to the surface. Although it is technically possible to pump water from an external source into a geothermal well to generate steam, most geothermal sites require a plentiful supply of natural underground water that can be tapped as a source of steam. In contrast, fossil-fuel generating plants can be at any convenient location.

Genetically engineered insulin

The invention: Artificially manufactured human insulin (Humulin) as a medication for people suffering from diabetes. The people behind the invention: Irving S. Johnson (1925- ), an American zoologist who was vice president of research at Eli Lilly Research Laboratories Ronald E. Chance (1934- ), an American biochemist at Eli Lilly Research Laboratories What Is Diabetes? Carbohydrates (sugars and related chemicals) are the main food and energy source for humans. In wealthy countries such as the United States, more than 50 percent of the food people eat is made up of carbohydrates, while in poorer countries the carbohydrate content of diets is higher, from 70 to 90 percent. Normally, most carbohydrates that a person eats are used (or metabolized) quickly to produce energy. Carbohydrates not needed for energy are either converted to fat or stored as a glucose polymer called “glycogen.” Most adult humans carry about a pound of body glycogen; this substance is broken down to produce energy when it is needed. Certain diseases prevent the proper metabolism and storage of carbohydrates. The most common of these diseases is diabetes mellitus, usually called simply “diabetes.” It is found in more than seventy million people worldwide. Diabetic people cannot produce or use enough insulin, a hormone secreted by the pancreas. When their condition is not treated, the eyes may deteriorate to the point of blindness. The kidneys may stop working properly, blood vessels may be damaged, and the person may fall into a coma and die. In fact, diabetes is the third most common killer in the United States. Most of the problems surrounding diabetes are caused by high levels of glucose in the blood. Cataracts often form in diabetics, as excess glucose is deposited in the lens of the eye. Important symptoms of diabetes include constant thirst, excessive urination, and large amounts of sugar in the blood and in the urine. The glucose tolerance test (GTT) is the best way to find out whether a person is suffering from diabetes. People given a GTT are first told to fast overnight. In the morning their blood glucose level is measured; then they are asked to drink about a fourth of a pound of glucose dissolved in water. During the next four to six hours, the blood glucose level is measured repeatedly. In nondiabetics, glucose levels do not rise above a certain amount during a GTT, and the level drops quickly as the glucose is assimilated by the body. In diabetics, the blood glucose levels rise much higher and do not drop as quickly. The extra glucose then shows up in the urine. Treating Diabetes Until the 1920’s, diabetes could be controlled only through a diet very low in carbohydrates, and this treatment was not always successful. Then Sir Frederick G. Banting and Charles H. Best found a way to prepare purified insulin from animal pancreases and gave it to patients. This gave diabetics their first chance to live a fairly normal life. Banting and his coworkers won the 1923 Nobel Prize in Physiology or Medicine for their work. The usual treatment for diabetics became regular shots of insulin. Drug companies took the insulin from the pancreases of cattle and pigs slaughtered by the meat-packing industry. Unfortunately, animal insulin has two disadvantages. First, about 5 percent of diabetics are allergic to it and can have severe reactions. Second, the world supply of animal pancreases goes up and down depending on how much meat is being bought. Between 1970 and 1975, the supply of insulin fell sharply as people began to eat less red meat, yet the numbers of diabetics continued to increase. So researchers began to look for a better way to supply insulin. Studying pancreases of people who had donated their bodies to science, researchers found that human insulin did not cause allergic reactions. Scientists realized that it would be best to find a chemical or biological way to prepare human insulin, and pharmaceutical companies worked hard toward this goal. Eli Lilly and Company was the first to succeed, and on May 14, 1982, it filed a new drug application with the Food and Drug Administration (FDA) for the human insulin preparation it named “Humulin.” Humulin is made by genetic engineering. Irving S. Johnson, who worked on the development of Humulin, described Eli Lilly’s method for producing Humulin. The common bacterium Escherichia coli is used. Two strains of the bacterium are produced by genetic engineering: The first strain is used to make a protein called an “A chain,” and the second strain is used to make a “B chain.” After the bacteria are harvested, the Aand B chains are removed and purified separately. Then the two chains are combined chemically. When they are purified once more, the result is Humulin, which has been proved by Ronald E. Chance and his Eli Lilly coworkers to be chemically, biologically, and physically identical to human insulin. Consequences The FDA and other regulatory agencies around the world approved genetically engineered human insulin in 1982. Humulin does not trigger allergic reactions, and its supply does not fluctuate. It has brought an end to the fear that there would be a worldwide shortage of insulin. Humulin is important as well in being the first genetically engineered industrial chemical. It began an era in which such advanced technology could be a source for medical drugs, chemicals used in farming, and other important industrial products. Researchers hope that genetic engineering will help in the understanding of cancer and other diseases, and that it will lead to ways to grow enough food for a world whose population continues to rise.